Sunday, October 2, 2011

It's Been Awhile... So here are RIBS

Well, there's been quite a bit going on as of late.  And heaven knows I haven't stopped barbecuing, but unfortunately the blog kind of fell by the wayside.  Often times I simply forget to take pictures--which I know make everything more interesting--and then by the end of it, I remember only as I sit down to eat.  But... the spare ribs I cooked today.  We were supposed to have awesome, record-low weather today, and it did not fail to disappoint.  Temperatures in the 70's at this time of year are unheard of, and it was the perfect afternoon for football and ribs.  This one will be a short one tonight, but I wanted to talk a little bit about the ribs and... the Minion method. 

The second rack of ribs, just before I pulled it. 
There are many variations on what is called the Minion method, invented by a man named Jim Minion.  The idea is that rather than continuing to add charcoal during cooks of more than 3-4 hours, you set the charcoal up initially in a special pattern to allow it to light itself as time progresses.  Some people claim to have achieved 12-18 hours of cooking time on a Weber Smoky bullet-style water smoker.  These types of setups tend to be very intricate--some I've even seen where the pitmaster will arrange the UNLIT coals almost like dominoes set to be knocked over (they'll even add the smoke wood pieces strategically through the coals to go off at the precise time).  A smaller, sometimes much smaller, amount of LIT charcoal is then added so that the remaining coals light very slowly--increasing the time you can cook with them, and also keeping the temperature down.  In some cases you may only add a few lit coals to a much greater amount of unlit ones.  The mix that I used today in the kettle is 2:1 unlit/lit coals.
 
You can read lots of other stuff on Jim Minion and his method, which is popular when cooking brisket low-and-slow.  Here's one from Virtual Weber Bullet, and another from a Google search.  That second link is almost exactly what I did today, picture-wise anyway.  Once again, as I mentioned, I simply forgot to start taking pictures earlier in the day. 

Now I was always under the impression that the Minion method was almost solely for use in water smokers, and I only currently own a kettle.  You can imagine my surprise while researching when I found many references to doing it in a kettle.  Even the Barbecue Pit Boys have a video detailing Minion and the kettle (go to about 4:15 minutes into the video).  So I decided that I had to try it--especially after the last time I did ribs and had to add charcoal 2 or 3 times during the 5 hour slow cook. 

I did up my spare ribs at about 10am on Sunday morning, with a target time of 4pm for the Miami Dolphins game today (which they lost).  I use a very simple homemade rib rub consisting of:

  • Brown sugar
  • Paprika
  • Garlic powder
  • Onion powder
  • Black pepper
  • Chili powder
  • My smoked salt
  • Celery seed
  • Cumin

The majority of the rub is brown sugar and paprika.  Go very lightly on the celery seed and cumin if you try this, they can be very strong.  I'll do a blog some day on how to make smoked salt, but it is really easy and you can probably find 50 web links on how to do it.

I always use yellow mustard to help the rub stick--some like this, others don't.  I also always take the time to remove the membrane on the back of the ribs.  Again, some don't care about this, others have a technique of scoring the back of the ribs to achieve the same effect. Finally, I usually leave the rub on for only an hour or two at most.  Again, others will say you can go even a whole day overnight.  I would rather add flavor as I go cooking with smoke wood and a good mopping sauce.  My mopping sauce is based on a sauce from a Steven Raichlin recipe and consists of: 

  • Apple cider
  • Apple cider vinegar
  • Fresh lemon juice
  • Smoked salt
  • Worcestershire sauce
  • and one or two other things that I can't remember (that's why I write them down!)

OK, so I start up the grill using Minion, put a large pan for indirect cooking, and dump in some more apple cider and beer that I've heated up on the stove.  If you add it in straight from the fridge, it can throw off the temperature in your grill, so I always bring mine to near boil.  Then I made some adjustments to the vents, and cleaned the grates.  Once the grill was hovering between 225 and 250, I knew it was ready to go.  Place the rack on over the coals, and finally put the meat on.  I cooked two racks of spare ribs today--well over 8 pounds of meat, even after it was trimmed.  So I had to use a method where you stack the racks of ribs on top of each other as they cook.  Some like those rib racks that you see in hardware stores.  I don't care for them--especially for spare ribs, because most times the ribs themselves are just too big. Oh yeah, I can't forget the smoke wood.  I used pecan wood to start out--a fairly hefty chunk went in. 

Relaxing with a beer and enjoying the weather. 
After 30 minutes had passed, I went outside to quickly mop the ribs and change their places on top of one another.  This makes for each cooking, and it really isn't as difficult as it sounds.  Don't be afraid to let the second rack "rest" over direct heat for 20 seconds as you position the "under" rack.  I also made sure to apply my mopping sauce all across the meaty side of both racks of ribs.  This pretty much repeats every 30 minutes until the ribs are done, and yes, it is as much of a pain in the ass as it sounds.  This is probably why I only do ribs once or twice a year (Got any other methods that work?  Let me know)!  On the first 2 or 3 times mopping, I also add another smaller piece of smoke wood.  You need to be careful here, and if you think you're using too much, you probably are.  I only add wood for the first 90 minutes or so.  I used apple wood, which is a little milder than the pecan. 

First rack was already being devoured at this point, but the second got some face time with the camera. 

A close-up of the second rack of ribs. 

The second rack, split in half, getting ready to be foiled.

One half down, one half to go. 

After about 5 hours, with the neighbors already arrived for the game, I pulled the first rack of ribs and sampled one of them.  Holy smokes it was delicious.  At this point, I prefer to leave the ribs on for about a final 10-15 minute stint.  ONLY at this time, do I then paint the meat side with barbecue sauce.  If you put sauce on earlier, you will find that it will burn and lose the taste that you set out to give it.  You can always serve the ribs with that special sauce you made on the side.  Besides, the sugar in the rub burns well enough!  I give the ribs a final rest for 10-20 minutes in an aluminum foil wrap.  This is supposed to let the juices redistribute.  It's hard to imagine that they put all of this hard work and love into your ribs when you go to the local barbecue joint! 

Anyway, the ribs were delicious and the neighbors gave good reviews, and even begged to take some home.  But I digress... The whole point of this blog was to say that at this point--over 6 hours later--my grill was still maintaining a temperature of 225 degrees.  Here's a shot of the coals that were still going after 6 hours. 

I wish I had a picture from the start to the finish.  There's a noticeable amount of coals gone, but with some adjustments to the vents, I never really had a problem keeping the temperature exactly where I wanted it. 

And I never added a single coal after the initial start batch.  Simply amazing.  I even went back outside while cleaning up to cook all the "rib trimmings".  Hopefully you enjoyed this affirmation of something that you have probably heard of, or maybe even tried yourself.  You can use it for ribs, but more importantly, you can also use it in a kettle style grill. 

Keep on grilling!